Categories  
  Hose Reels Equipment
  Wet and Dry Riser Equipment
  Hydrant Equipment
  Water and Foam Nozzles
  Adaptors, Couplings and Caps
  BS EN3 Fire Extinguishers
  Cabinets
  Sprinkler System Equipment
  Flow Control Equipment
  Fire Alarm
  Miscellaneous


Hose Reel Equipment:

  Specification
  • Side Plate powder painted finish red
  • Automatic hose reel has integrated automatic stop valve which will open after 2 revolution of the reel
  • Threaded Inlet connection
  • Outlet connection for hose can be rotated for left and right direction
  • Waterways made from non ferrous metals which ensure corrosion free*
  • Maximum working pressure 15Bar, test pressure 20bar
  • Side plate available in stainless steel           *(EN671 Approved models)
  •   SRI fire hose reels are tested and approved to European Standard EN671 by British Standards Institution and to Australian Standards AS1221 by QAS Australia.
     

     

    Wet and Dry Riser Equipment:

      Specification
  • Body : Spheroidal Graphite Iron to BS 2789 or Cast Iron BS 1452
  • Inlet : BS Instantaneous Male Copper Alloy to BS 1400
  • Outlet : 2 Way Breeching Inlet Flanged 4" table E. BS 10.
    : 4 Way Breeching Inlet Flanged 6" table E. BS 10.
  • Working pressure : 15 Bar
  • Testing Pressure : 20 Bar

  •  
    Air Release Valve

     

    Hydrant Equipment:

    Oblique Valve
      Specification
    • Body : Copper Alloy to BS 1400
    • Handwheel : Grey Cast Iron to BS 1452
    • Inlet : Flanged or BSP screw thread
    • Outlet : Female instantaneous to BS 336 and other connections
    • Pressure Test : 22.5 bar
    • Manufacture and certified to BS 5041 Part 1*
    • Nominal size : DB65 2-1/2", DN50 2".

     
    Pressure Regulating Valve 'E' Type
      Specification
    • Suitable for inlet pressure up to 20bar
    • Reduced outlet static pressure can be set from 5 to 8bar
    • Outlet pressure remain constant with inlet pressure range from 7bar to 20bar
    • Pressure test to 30bar
    • Flowrate up to 900L/M

     
    2 Way Fire Hydrant
      Specification
    • Body material : Cast Iron to BS 1452
    • Outlet : Copper alloy BS 1400
    • Test pressure : 30 bar (435 psi)
    • Working pressure : 20 bar (290 psi)
    • Finishing : Red & Yellow
    • Model HYD059-CI-100-YW can be fitted with an underground 4" gate valve with spindle cap (sluice valve) and operated by using a hydrant key and bar (HYD066-CI-030-BK / HYD066-LA-030-NA)

     
    Underground Hydrant BS 750
      Specification
    • Body material : Grey Cast Iron to BS 1452 or (SG) BS 2789
    • Outlet : Copper Alloy to BS 1400 Round thread or V thread
    • Inlet : Universal Flange PN16 & Table E
    • Test pressure : 24 Bar (348 psi)
    • Colour : Black or Blue

     
    Cast Iron Hydrant Chamber
      Specification
    • Body material : Spheroidal Graphite Cast Iron (SG) BS 2789
    • Loading Capacity : 5 tonnes
    • Opening dimension : 410mm x 330mm
    • Bedding dimension : 560mm x 495mm

     
    Duck Foot Bend
      Specification
    • Body material : Grey Cast Iron to BS 1452
    • Flanged Inlet & Outlet: 4" BS 10 Table E Flange

     
    Concrete Hydrant Chamber
      Specification
    • Body : Concrete
    • Cover : Mild Steel
    • Opening dimension : 445mm x 280mm
    • Bedding dimension : 580mm x 415mm

     
    Layflat fire hose
    Sri Fire Hose, Type 1
      Specification
    • Internal rubber lining combined with closely woven polyester fibre.
    • Direct vulcanisation, high adhesion between jacket and lining.
    • Standard length: 30m
    • Available colour: Red or White
    • Manufactured to BS 6391 Type 1

     
    .
    Sri Fire Hose, Type 3
    ,
      Specification
    • External and internal rubber lining, with polyester fibre reinforcement.
    • Resistance to oil, acids, alkhaline and industrial chemicals
    • Resistance to heat, cold and ozone
    • Standard length: 30m
    • Available colour: Red
    • Manufactured to BS 6391 Type 3

     

    Water and Foam Nozzles:

    Jet Nozzle Complete With Branchpipe Diffuser Nozzle 500 ( Jet / Spray )

     
    Diffuser Nozzle 800 ( Jet / Spray ) Jet / Spray Nozzle With Control Valve ( Jet / Spray )

     
    1 - 1/2" Jet / Spray Nozzle Water / Foam Pistol Grip Nozzle ( Jet / Fog )

     

    Adaptors, Couplings and Caps:

    BS Female Instantaneous X Female Screw Thread Adaptor BS Female Instantaneous X Male Screw Thread Adaptor

     
    BS Male Instantaneous X Female Screw Thread Adaptor BS Male Instantaneous X Male Screw Thread Adaptor

     
    Double BS Female Instantaneous Adaptor Double BS Male Instantaneous Adaptor

     
    100mm Male Screw Thread X BS Female Instantaneous Adaptor 100mm Female Screw Thread X BS Male Instantaneous

     
    BS Instantaneous Male Blank Cap BS Instantaneous Female Blank Cap

     
    100mm Female Screw Thread Blank Cap 65mm Instantaneous Male Pressure Test Cap C/W Gauge

     
    Storz Adaptor and Cap French Connection Adaptor and Cap (DSP)

     
    Camlock Coupling Machino Coupling

     
    BS336 Coupling Instantaneous Coupling

     
    French Guillemin Coupling Russian Gost Coupling

     
    Storz Coupling

     

    BS EN3 Fire Extinguishers :

    BS EN3 Powder type Fire Extinguishers

      Specification
  • British Standards Institution - BSI approval store powder and cartridge type.
  • Suitable for Class A, B, C & electrical hazards.
  • Ideal for industrial, commercial and domestic environment.
  • High quality and good value.
  • Colour coded for instant recognition.
  • All units tested by electronic leak detection.
  • Operated effectively at both high and low temperature.
  • ISO 9001:2000 Certified Quality System by QAS Australia

  •  

    BS EN3 CO2 type Fire Extinguishers :

      Specification
  • British Standards Institution - BSI approval.
  • Suitable for Class B & Electrical Hazards.
  • Available in aluminium and light weight steel.
  • High quality and good value.
  • Colour coded for instant recognition.
  • Easy to use and leave no messy residue.
  • ISO 9001 Certified Quality System by QAS Australia.

  •  

    BS EN3 Water & Foam Type Fire Extinguisher :

      Specification
  • British Standards Institution - BSI approval.
  • Foam type is suitable for Class A & B.
  • Water type is suitable for Class A.
  • Protective plastic lining
  • Colour coded for instant recognition.
  • High quality and good value.
  • ISO 9001 Certified Quality System by QAS Australia.

  •  

    CABINETS:

    MODEL A DOUBLE COMPARTMENT HOSE REEL CABINET :

      Specification
  • Overall Dimension :740mm (W) x 1540mm (H) x A (D)
  • Material :Mild Steel
  • Thickness :1.2mm
  • Installation :Surface / Wall Mounted, Recessed
  • Capacity :Manual or Automatic swing Hose Reel 3/4" or 1", & 2pcs Fire Extinguisher
  • Paint Finish :Epoxy Powder Red / White, 70 micron min.

  •  

    MODEL E DOUBLE COMPARTMENT HOSE REEL CABINET :

      Specification
  • Overall Dimension :700mm (W) x 800mm (H) x A (D)
  • Material :Mild Steel
  • Thickness :1.2mm
  • Installation :Surface / Wall Mounted, Recessed
  • Capacity :Manual or Automatic swing Hose Reel 3/4" or 1", & 2pcs Fire Extinguisher
  • Paint Finish :Epoxy Powder Red / White, 70 micron min.

  •  

    2 WAY AND 4 WAY BREECHING INLET CABINET :

      2 way breeching inlet cabinet Specification
  • Overall Dimension :595mm x 395mm x 295mm
  • Material :Mild Steel
  • Thickness :0.9mm
  • Glass :Wire Meshed Reinforcement
  • Installation :Surface / Wall Mounted, Recessed
  • Paint Finish :Epoxy Powder Red
  •   4 way breeching inlet cabinet specification
  • Dimension :595mm x 595mm x 295mm
  • Material :Mild Steel
  • Thickness :0.9mm
  • Glass :Wire Meshed Reinforcement
  • Installation :Recess Mounted
  • Paint Finish :Epoxy Powder Red

  •  

    Sprinkler System Equipment:


     

    Sight Glass Flow Connection


     

    Flow Control Equipment:

    Gate valve:

      Specification
  • Non rising stem (handwheel or key operated) and O.S & Y
  • Body, bonnet, disc and handwheel material: Cast iron or Ductile iron, Cast iron to BS 1452 Gr.220, Ductile iron to BS2789 Gr.420/12 or 500/7
  • Available in : 1) Resilent Seat for Non Rising Stem PN16 and O.S & Y 2) Metal Seat for Non Rising Stem PN10
  • Packing material : For Resilent Seat - EPDM/NBR O Rings For Metal Seat - Polymide (Non-asbestos)
  • Stem material : Stainless steel
  • Gasket Material : EPDM / Rubber

  •  

    Butterfly Valve PN16 Bomba Approved

      Design Features
  • Manufactured to BS 5155, BS EN 593
  • BEpoxy paint internal and external
  • Installation horizontal or vertical
  • Working Pressure : 16 Bar
  • Working Temperature : -20c to +120C
  • For Metal Seat - Polymide (Non-asbestos)
  • Seat Test Pressure : 17.6 Bar
  • Body Test Pressure : 24 Bar
  • Service Fluids : Water, Oil or Gas
  • Flanges : PN 16 or Table E
  • Sealing ring : EPDM
  • Body & Disk : Ductile Iron
  • Shaft : Stainless steel

  •  

    Wafer Check valve:

      Specification
  • Working Pressure: 16 Bar
  • Factory pressure test: 24 Bar
  • Body material: Cast iron BS 1452
  • Disc material: Ductile iron
  • Stem material : Stainless steel
  • Seat: EPDM
  • Suitable for BS 10, BS 4504 and ANSI 150 flange

  •  

    Fire Alarm:

    Optical Smoke Detector

    HC Rate Of Rise Heat Detector

    Battery Operated Smoke Detector

    Operating Voltage : 17 - 28 Volts Operating Voltage : 24VDC Operated by : DC 9V Battery

     

    Manual Call Point

    6" Alarm Bell

    Rating : 10 Amps @ 24VDC Operating Voltage : 24VDC

     

    Miscellaneous:

    Fire Blanket

    Material of blanket : Woven Fibre Glass